|
|
|
|
|
|
|
|
 |
Please click image to order a catalogue. |
|
Clamping
Elements RCK 16
|
|
 |
These
clamping elements are basically to same design as RCK 13, but with increased
diameter flange to locate hub and prevent axial movements, so combining
good concentricity with positive axial location. The increase in friction
between the cones due to axial restriction results in torque reduction of
approx 20% , but this also means reduced surface pressures to both hub and
shaft. Clamping Elements RCK 16 PDF Catalogue |
 |
|
| Clamping
Elements RCK 19 Type RCK 19 are normally referred to as Clamping Discs, used to clamp externally onto thin walled hubs to lock them to the shaft. The design permits the use of large diameter shafts with small hub sizes, and is popular for connection of large sprocket and pulleys. The design provides for optimum concentricity, with high torque transmission. A number of shaft diameters can be accommodated by one size of unit. Clamping Elements RCK 19 PDF Catalogue |
 |
|
|
|
Clamping
Elements RCK 40
|
|
 |
These
are the original type of shaft clamping elements, proven in a wide range
of applications for more than 20 years. Suited to more general applications,
this series provides medium torque transmission, which can be increased
by mounting the unit in series. This type does not provide self centering,
and therefore other methods of centring the hub to the shaft are required.
The units do not move axially during clamping and generally self-release
when clamping screws are relaxed. Clamping Elements RCK 40 PDF Catalogue |
|
|
| Clamping
Elements RCK 50 These shaft clamping elements consist of just two conical rings which require the minimum of radial space, so providing compact assemblies, and enabling use within small hub diameters. The design offers the maximum versatility of design, but does require the customer to provide their own thrust ring assembly. Whilst only providing low torque transmission per unit they can be combined (up to 4 units) to increase 'torque capacity. When fully clamped these units provide excellent gaslight sealing. Many designs of thrust rings are possible. These units do not self centre, so require external means of centring the hub. Clamping Elements RCK 50 PDF Catalogue |
 |
|
|