Cross and Morse are a Power Transmission manufacturer with a range of drives, bearings, shafts, rollers, chains, and clutches.

Please click image to order a catalogue.

*Cross & Morse offers the following types of Flexible shaft couplings which can cater for the requirements of most types of drive installation.*
	*Morflex Couplings* A medium speed coupling, up to 6,500 rpm. Excellent misalignment capabilities, up to 5 degrees angular, with good torsional damping. Morflex couplings are available with oval flanges for coupling numbers 252, 302 and 352. Round flanges for Morflex couplings are in types 402, 502, 602, 702, 802, 902, 1002 and 1202. Use Morflex type couplings:-
	To accommodate high levels of misalignment On applications with high torsional requirements On agricultural and off-road vehicles On mixers and other flexibly mounted machinery Morflex Couplings PDF Catalogue
*Polymer Sleeve Gear Couplings - Type GF* Low cost, gear couplings for lower power applications, available in 10 sizes with torque capacity to 410Nm and shaft speeds up to 14,000 rpm. The GF Coupling consists of two steel hubs with external crowned and barrelled gear teeth, phosphated for corrosion protection, connected by a synthetic resin sleeve. Medium to high speed, 14,000 rpm max, basically maintenance free gear coupling. Good misalignment capability combined with torsional rigidity. Suitable for most environments. Use Type GF Couplings:-
	For connection of hydraulic pumps For agricultural and exposed machinery For food and drinks industry GF Couplings PDF Catalogue
	*Gear Couplings - Types GFA and GFAS* Coupling types GFA and GFAS are designed for heavy industrial applications, providing a torsionally stiff connection of shafts which can accommodate angular and parallel misalignment and axial movement. The GFA gear coupling consists of two hardened steel hubs with external crowned and barrelled gear teeth, connected by a hardened steel sleeve with matching gear teeth. High torque capacity coupling for medium speed applications, up to 6,000 rpm. Torsionally stiff. Require good alignment for long service life. The GFAS gear coupling has only one hub with external teeth, which connects to a sleeve with integral hub, to reduce weight and inertia. This series provides a stiffer connection, particularly suited to cardan shaft applications. Use Gear couplings:-
	For high torque reversing drives on Cranes, Rolling Mills For high shock load applications, Crushers, Rubber Mills Large Motor Gearbox connection Drives requiring torsional stiffness GFA-GFAS Couplings PDF Catalogue
*Crossflex Disc Couplings* Crossflex Disc flexible shaft couplings provide reliable and accurate transmission of mechanical power for applications requiring low maintenance and no lubrication.
	The couplings are particularly suited for drives to pumps, compressors, generators and paper making machinery operating in poor environmental conditions, as well as the accurate drives on assembly equipment, printing machines and servomotors. The well balanced all steel construction enables transmission of high torques at high shaft speeds, as encountered on turbine drives. Three hub designs and an option of a spacer provide numerous design possibilities to accommodate space limitations and shafting dimensions. Crossflex Couplings PDF Catalogue